StangEaterSS

iTrader: (41)

I finally did fuel rails and the Russel fitting that adapts the hard fuel feed line to a braided line. Now this line next to it I assume is a vent or something. Do you just leave this wide open? I do not use a return on my fuel system. I have no use for this line. Should I cap it off maybe? what does everyone do?
Here is a picture of what I'm talking about.

jrpimp00

iTrader: (17)

if this is a fbody then its the evap line. Evap should be on the driver side by the fuel rail.

StangEaterSS

iTrader: (41)

Yes 2000 Camaro. The rubber hose that went to the plastic thing on the fuel rail is in the garbage. No need for it anymore.

jrpimp00

iTrader: (17)

you can cap it off then if youre not using it. Why dont you run a return?

StangEaterSS

iTrader: (41)

No need. Heads/cam Ls1 stock fuel system. I got rails when I switched Intakes so I had to run braided line to the hard line otherwise I would t have even spent the money on that lol.

jrpimp00

iTrader: (17)

If you have the stock fuel system you do have a return, its in under the car in front of the fuel filter.

StangEaterSS

iTrader: (41)

Yes. Factory style return infront of the gas tank. Not engine bay location return off the rail. Guess I'll just cap the thing off and get this thing running.

Zmg00camaross

iTrader: (11)

Was going to ask the same question! Little cap I guess to keep dirt out of the line.

blk00ss

iTrader: (66)

I cut mine on where it comes off the fuel tank and ran a hose into the gas fill area. If not it fills up the car with fumes.