Injector identification help
#1
Teching In
Thread Starter
Join Date: May 2015
Location: Southern Indiana
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Injector identification help
need some help identifying what injectors I have. Intake off an early 2000s 5.3 with no return fuel line. I believe these are the EV1 connectors but I'd like some verification of anyone can help. Here are a few pics.
Another question while I'm here. This is going in my 93 1500 with a TBI 350 which has a return line for fuel. What do I need to do with my lines and fuel pump to run a no return setup?
Another question while I'm here. This is going in my 93 1500 with a TBI 350 which has a return line for fuel. What do I need to do with my lines and fuel pump to run a no return setup?
Last edited by 70CamaroRS; 06-04-2015 at 06:13 PM.
#4
Teching In
Thread Starter
Join Date: May 2015
Location: Southern Indiana
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I figured out they are Multec 2 injectors. Apparently its impossible to find adapters that go from Multec 2 injectors to a different harness, everything goes from EV1 or EV6 injectors to Multec 2 harness