INSANEREINDEER

I received some Bosch 80# injectors. Not having any experience before with anything but the stock injectors I have no idea what markings they should have on them. Are these Bosch 80# injectors? If they are why do they say FoMoCo (I assume Ford Motor Company) on them? What's the deal with scratching the PN out on each one?

Undertow74

iTrader: (45)

They are most likely Bosch ford cores that have been rejetted to 80lbs. P/n has been scratched off to not confuse them with what they use to flow as stock before re jetting them.

INSANEREINDEER

I was told these were straight from the factory 80lb Brand New Bosch Injectors.

Undertow74

iTrader: (45)

Either way I'm sure they are just as good if not better. I would just contact whoever you bought then from

Old Geezer

iTrader: (3)

they are really factory fresh, the numbers won't be defaced.
Sounds like, as mentioned, they may be "reflowed", or some clown is protecting his secret formula...Which is

INSANEREINDEER

Well I purchased them from a company who is a vendor on the site. I was told the number were scratched out to protect competitors from knowing which injectors they used. I assume they get them and flow match them? I have read about Injector Dynamics doing the same thing with the part numbers.

Not trying to bash the company who sold them but I was just curious about them.