fccs

iTrader: (26)

Have a walbro 450, 80lb injectors, thinking I probably need to pickup a high flow fuel filter. Any ideas?

mike431987

iTrader: (1)

Been looking at the same thing. I decided to go with a fuelab 828 series fuel filter it comes with -an male ends already on it aND you can get different sizes I'm going with the 10 micron. This filter also is bigger than most iv found. I'm running twin 255 on 80 lbs. You can take the filter element out and replace it at will. I did a few hours of research and was close with the aeromotive but I liked the faCT that this one was larger.


http://www.jegs.com/i/Fuelab/083/82802-3/10002/-1

fccs

iTrader: (26)

I have stock lines though, will this work?

mike431987

iTrader: (1)

Oh no it wont. I believe the corvette filter would not sure on that one though.

Fat Jesus 808

iTrader: (5)

I used a stock inline camaro filter and made that much power