BADFNZ

iTrader: (19)

How do you undo the quick disconnect from the line to the rail? I can't find it anywhere. There's also a quick disconnect on the front drivers side of the intake going to some part of the fuel system. How do you disconnect this one also?

Bimmer Tech

iTrader: (1)

You use a quick disconnect tool. Parts store should have it. Little plastic tool that slids into the connector.

BADFNZ

iTrader: (19)

Am I doing this right? Nothing is happening. I'm sliding the blue tool to the right and pulling the right side of the line off, correct?

227Hawk

iTrader: (1)

Push the line to the left. After the tool is inserted and then pull right.
Hawk

BADFNZ

iTrader: (19)

Ok so I'm pushing the right side of the line to the left, inserting the tool, then pulling the line to the right? That's not working

Do I just pull the line to the right or push the line to the right using the tool?

Bimmer Tech

iTrader: (1)

Usually I insert the tool, push the two sides together, make sure the tool is all the way in, then pull the two lines apart.

227Hawk

iTrader: (1)

Every once in a while they can be a BITCH .Try using the 5/16" tool,insert, push left on the line. Push tool in again and then pull right on the line
Hawk

BADFNZ

iTrader: (19)

I've tried everything and no dice

BADFNZ

iTrader: (19)

I need to get this damn thing off tonight.