Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

H/C+Spray+T56 = what rear?

Old 12-01-2008, 10:49 PM
  #1  
10 Second Club
Thread Starter
iTrader: (4)
 
BarneyMobile's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 789
Likes: 0
Received 1 Like on 1 Post

Default H/C+Spray+T56 = what rear?

I in the market for a stronger rear. I'm pretty much set on a Moser 9inch, But my dilema is weather to get it with a trutrac, a locker, or a spool. Its spends 95% of its time on the street as a DD. Because its a DD, I would love to have the trutrac but with the nitrous my car makes 600ft/lbs at the wheels and its a 6speed car. I plan on launching hard on slicks at the track and the car is full weight. What route should I go?
Old 12-02-2008, 08:38 AM
  #2  
LS1TECH Sponsor
iTrader: (33)
 
Steve Burger's Avatar
 
Join Date: Jul 2002
Location: Out on the farm in Central IL
Posts: 4,399
Likes: 0
Received 0 Likes on 0 Posts

Default

Locker at a minimum. That will alos allow you to tun a 35 spline axle.
Old 12-04-2008, 09:20 AM
  #3  
TECH Addict
iTrader: (66)
 
blk00ss's Avatar
 
Join Date: Feb 2007
Location: Jasper, AL
Posts: 2,366
Likes: 0
Received 5 Likes on 5 Posts

Default

I hated my locker with a six speed. Very aggrevating. Every time you change gears or let off the gas and get back on the gas the whole car wants to "wander" all over the place. I swapped my locker out for a spool. I wouldn't have anything else. Also I don't know why eveyone gets hung up on 35 spline axles. I've never seen a 31 spline break. That's what I have and I have cut low 1.6x sixty foots with a 3600lb car with 740ft lbs of torque.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:26 PM.