How can I tell if it is a Moser 9 Inch?
#1
How can I tell if it is a Moser 9 Inch?
I am looking for some information on how to tell if I actually have a Moser 9 inch. The end of the axles don't have the sticker on them, but I have been told that they come without and you put them on by several people. This is in a 98 Camaro SS. I would love to get your input.
P.S.
I broke my aluminum drive shaft at the drag races and need a new one. What do you guys recommend for mostly street use but some drag racing too?
P.S.
I broke my aluminum drive shaft at the drag races and need a new one. What do you guys recommend for mostly street use but some drag racing too?
#3
Take a picture of the torque arm bracket and post it on here. The axle stickers do come separate and you have to install them yourself. This is done so the stickers don't get damaged during shipping and assembly. Bob
#5
TECH Enthusiast
iTrader: (28)
Join Date: Apr 2008
Location: Grayson, KY 41143
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Any reason it matter who made the housing? Any 9" should have the same dimensions as far as your driveshaft goes if that is what your trying to figure out. Best bet is still to just measure for length though I would go with a chrome moly shaft that is what I always run and I am sure many others as well.
#7
TECH Enthusiast
iTrader: (28)
Join Date: Apr 2008
Location: Grayson, KY 41143
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
http://www.exoticperformanceplus.com....html?item=541
This is the driveshaft I recommend and sell. It is rated at 1000 hp and comes with a lifetime guarantee. Bob
This is the driveshaft I recommend and sell. It is rated at 1000 hp and comes with a lifetime guarantee. Bob
Trending Topics
#9
Get a lot of mixed answers on the topic and I notice your site doesn't say, but what length does it come in to go between a 9" and 6 speed? By the way the housing you shipped me about a month ago looks awsome still havent' got a chance to get it under the guys car yet, I am working on that though
#10