12 bolt u joint question
#1
On The Tree
Thread Starter
iTrader: (36)
Join Date: Dec 2008
Location: Warsaw, IN
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
12 bolt u joint question
I have a 1310 series Moser 12 bolt, it is about 5-6 years old I think. (Not sure on age because it came out of a friends car and he can't remember how old it)
I am needing the U joint to go from a stock drive shaft to the 12 bolt. I have contacted Moser twice and they have given me two different precision part numbers (348 and 447) I have gotten both of those and nither one will work.
So now I have done some homework and I believe I have found the right U joint. I need one that messures 1.063 on the axle caps and 3.218 overall length, and 1.125 on the drive shaft cap with a overall of 2.563.
I am thinking I need precision part number 372. Is this correct?
I am needing the U joint to go from a stock drive shaft to the 12 bolt. I have contacted Moser twice and they have given me two different precision part numbers (348 and 447) I have gotten both of those and nither one will work.
So now I have done some homework and I believe I have found the right U joint. I need one that messures 1.063 on the axle caps and 3.218 overall length, and 1.125 on the drive shaft cap with a overall of 2.563.
I am thinking I need precision part number 372. Is this correct?
#2
LS1Tech Sponsor
iTrader: (16)
I have a 1310 series Moser 12 bolt, it is about 5-6 years old I think. (Not sure on age because it came out of a friends car and he can't remember how old it)
I am needing the U joint to go from a stock drive shaft to the 12 bolt. I have contacted Moser twice and they have given me two different precision part numbers (348 and 447) I have gotten both of those and nither one will work.
So now I have done some homework and I believe I have found the right U joint. I need one that messures 1.063 on the axle caps and 3.218 overall length, and 1.125 on the drive shaft cap with a overall of 2.563.
I am thinking I need precision part number 372. Is this correct?
I am needing the U joint to go from a stock drive shaft to the 12 bolt. I have contacted Moser twice and they have given me two different precision part numbers (348 and 447) I have gotten both of those and nither one will work.
So now I have done some homework and I believe I have found the right U joint. I need one that messures 1.063 on the axle caps and 3.218 overall length, and 1.125 on the drive shaft cap with a overall of 2.563.
I am thinking I need precision part number 372. Is this correct?
1310-1344 conversion
Bearing Cap Style 2 grooved, 2 plain
Bearing Cap Diameter (in) Axis 1 1.125 in.
Width Including Clips (in) Axis 1 2.563 in.
Bearing Cap Diameter (in) Axis 2 1.063 in.
Width Overall (in) Axis 2 3.218 in.
Combination 1310/1344 universal joint.
Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website