question on gears
10-05-2010, 03:42 PM
#1
On The Tree
Thread Starter
iTrader: (54)
Join Date: Oct 2008
Location: OHio
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
question on gears i wanna swap gears in my 9 inch for my turbo setup and my question is my buddy has a 4wd 9 inch third member with 3.50 gears and id like to throw that on my detroit locker if possible? i can get these for cheap and installed for free thats the only reason i ask. not sure if theyd be weak
10-06-2010, 05:42 AM
#2
I don't see you having any problem with them. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
10-08-2010, 01:23 AM
#3
9" gears the o.e.m. ford gears are very good gears, plus having 10 teeth on the pinion will give you substantial tooth contact area. so as long as they are set up correctly you should be fine. not to mention they used some badass steel back when those were made.
