Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

moneys tight need some help!!

Thread Tools
 
Search this Thread
 
Old 04-07-2012, 12:15 PM
  #1  
On The Tree
Thread Starter
iTrader: (2)
 
Brewski4u1's Avatar
 
Join Date: Apr 2003
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts

Default moneys tight need some help!!

Ok so the bearing went bad on the drivers rear and took out the axle. well i need another axle. i know all the 99-02 z28 m6 are the same but what other axle or models will work going to the junk yard in a few days see if i can find a good one .


thanks
Old 04-07-2012, 02:49 PM
  #2  
TECH Senior Member
iTrader: (96)
 
01ssreda4's Avatar
 
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 79 Likes on 70 Posts

Default

Auto axles will work as well.
Old 04-07-2012, 02:54 PM
  #3  
11 Second Club
iTrader: (1)
 
BTLD_LS1's Avatar
 
Join Date: Sep 2006
Location: San Antonio
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts

Default

u in San Antonio by any chance?
Old 04-07-2012, 03:39 PM
  #4  
TECH Senior Member
iTrader: (11)
 
SparkyJJO's Avatar
 
Join Date: Aug 2007
Location: Ohio
Posts: 7,195
Likes: 0
Received 10 Likes on 9 Posts

Default

Any 98-02 fbody axle will work. V6 or V8, Camaro or Firebird, auto or manual, doesn't matter, the 10 bolt axles are all the same. The only difference is the ABS system - 4 channel ABS cars have reluctor rings on the axles, 3 channel ABS cars don't. I believe the reluctor ring can be removed however.
Old 04-08-2012, 02:47 PM
  #5  
TECH Addict
iTrader: (22)
 
Pocket's Avatar
 
Join Date: Apr 2009
Location: NC
Posts: 2,507
Likes: 0
Received 38 Likes on 26 Posts

Default

The ring can be pressed off the 4 channel axles, but 3 channel axles do not have the machined surface cast into them, so theres nothing to press the ring onto




All times are GMT -5. The time now is 08:27 AM.