Leeroyws6

iTrader: (4)

i got a guy at my job thats offering me a 28 spline locker with 3.42s in it for $125. i dont know how loud it will be.i do alot of street driving and i dont want it to be clunky and loud.he says it only clicks around corners,and its not that loud.
on the other hand i found a rear end with 342.s out of a 99 z28 for $300.

IF YOU WERE ME,WHICH ONE WOULD YOU GUYS GET AND WHY?i gotta buy one or the other very soon.so let me know.thanks

Leeroyws6

iTrader: (4)

55 views and no one has an opinion? just wondering which one would be the better deal.

oldmano2z

how many miles on each? seems like the locker might whine but then the other might also when a deal is to good to be true you have to look close any 6spd stock 10 bolt is scary thats from my experence.

OutrunNAScaR14

iTrader: (4)

I'll give you 150$ for the locker right now. Easy way to make 25$

therabidweasel

iTrader: (5)

There are some videos of lockers around here that have made me certain I don't want one on a street car. Might search for them or look on you tube.

Leeroyws6

iTrader: (4)

im going with the locker.the videos on YT are of aftermarket 33 and 35 spline detroits.this is a 28 spline auburn.for $125 i cant go wrong.plus i think the stock 10 bolt is a ticking time bomb if i spray 100 shot off the line.

Leeroyws6

iTrader: (4)

80k on locker. unknown on the 10 bolt.

Bob@BruteSpeed

iTrader: (16)

The locker will give you traction from both tires, but the 10 bolt will still be a ticking time bomb. The 10 bolt rear is just too small, everything about it is weak. Bob

L84ARACE

iTrader: (1)

I have a detriot locker in my 02 ss and it works great but is very clunky and sometimes aggravating.I would rec.a limited slip for the street.

Leeroyws6

iTrader: (4)

is it a 28 spline? i hear the detroits are very noisy.

therabidweasel

iTrader: (5)

So, you know that the number of splines has to do with what axles it will accept, right? As far as I know (not that far) it has nothing else to do with the diff.

L84ARACE

iTrader: (1)

No mine is a Moser 9 inch with 33 spline .and dont get me wrong it's a great axle and my car is not a daily driver. If it were I would buy another third member with a posi.

L84ARACE

iTrader: (1)

I think a locker in a 10 bolt would be useless.

SS SLP2

iTrader: (8)

I ran a 28/10 bolt/locker on strip/street for 6-7 years
and was very happy with it.( now on a 9"/locker/31 and still happy)
Johnny

Leeroyws6

iTrader: (4)

THIS LOCKER IS NOW FOR SALE.the douche bag that i bought it from was supposed to helpe me set it up this morning but he just jerked me around.anyway, its a 28 spline locker with 3.42 gears and $50 worth of bran new bearings on it.i want $200 plus shipping cause i just spent $50 at oreillys on new bearings.$20 for diff and $30 for pinion.new crush sleeve also.IF ANYONE WANT IT,TEXT ME AT 817-fourtwenty-2689. thanks

nothing upsets me more than people telling me there going to do something and then at the last minute they make some douche bag excuse about the doctor. that sucks and i wont deal with people like that.i drained my old diff and was literally wainting on him when he pulled this ****.im just so pissed right now.needed to vent.

im going with the 3.42 complete rear thats just a direct bolt in.just gonna make it a fast street car.hopefully the posi will hold up for four or five passes.thats all.

L84ARACE

iTrader: (1)

Good luck with that !