pewterta

iTrader: (6)

both my axle seals are leaking... my pinion is leaking...and my trans seal.(were it connects to the drive shaft) is leaking!!!!

not over filled..either..any ideas...and any part nmbers would be very helpful

thanks u so much!

shawn

69chevy

just an idea but just check the bolts or whatever to see if they're tight. maybe they didnt tighten them all the way or something

LOnSLO

iTrader: (15)

Also check your housing vent. If it's blocked or pinched, it will leak out of everywhere.

pewterta

iTrader: (6)

yea the hose is fine..i cant imagin that is hard to cloge or be pinched it stands straight up

peterock98

iTrader: (25)

Did you put synthetic fluid there?I see you have a moser .My strange 12 bolt was leaking from the pinion seal with less than 1000 miles on it. When I called them that was the first question he asked me.

studlybilly

You'd be surprized how much junk gets globbed in there, I've even had to take a small drill bit and ream some out before. If it happens to be leaking out of ALL seals, then my bet is going on a venting problem.

pewterta

iTrader: (6)

changed out axle seals ( cheap japeneses ones were in there..damn moser!!) and pinion seal..

well see what happens..so far dry as a bone