erodrig2

I have a m6 and just went from 342 to 410 on my 10 bolt. What gear do you guys finish the 1/4 mile on?

transamsixspeed

iTrader: (2)

you should finish in fourth unless you are running 115+ in the 1/4

redline2k

iTrader: (9)

With my old setup I was traping about 120 and finishing in 4th when I had 4.10's. I recall it was at about 6300 rpm when I went through the traps that is on 26" tires

racer88

On stock 17" tires I am all the way through 4th the shift light is lit. But I also raised my rev limiter to 6600 when I had my stock cam and shifted around 6K. Now it's at 7K and I shift between 6400-6600 and I am now on a 15" tire.

mcflyz28

I raised my limiter to 6600 and I'm just there, shift light is at 6300 and it's on !

VTC_WS6

iTrader: (9)

So is it safe to say that with ~400whp, you're going to be seeing 5th with 4:10's and a 17" wheel/tire?

demonspeed

iTrader: (7)

I'm almost at the top of 4th when I cross the line.

erodrig2

Thanks for all the comments. Im hoping i finish at top of 4th gear cause thats why i went from 342 to 410. With the 342 i wouldnt have a chance to pull on 4th. Ill let you guys know what happens.

black00TA

iTrader: (3)

my car wraps out completely in 4th at like 6400 rev set at 6600 on 16inch street tires.

WS6HUMMER

iTrader: (19)

On a 26" tire I would be almost topping out 4th back when I had a 4.10/10bolt. I have the revlimiter moved to 6800 for my cam though.