ActionJack

Which carrier is used stock for a WS6 with 3.23?

Is it a 3 series or a 2 series?

12secSS

iTrader: (30)

3 Series Carrier

ActionJack

That's what I thought. Only the 2.73 gear has the series 2...


But, I still have to figure out why my rear sounds like something is 'grinding' (for lack of better word) when I am WOT from a dig.

Thanks

Ouija

iTrader: (3)

Anything with a 3.08 or lower was a 2 series carrier.

Above that was a 3 series.

Fast Eddie's 02 T/A vert.

unless you get the thick gear, then you can use the series 2

Ouija

iTrader: (3)

Uhm, I'm sure what you meant to say is: *IF* you have a series 2 carrier you need to order the "thick" or "X" gear. If you have a series 3 then you order a normal gear. The "thick" or "X" gear is NOT for a Series 3 carrier.

Fast Eddie's 02 T/A vert.

Ouija, yes that is what I meant. I kinda said that *** backwards didn't I. Looks like ActionJack has it figured out anyways. Sorry for the confusion.

Ouija

iTrader: (3)

Figured that's what you meant. Just didn't want him to get confused.

Fast Eddie's 02 T/A vert.

Ouija, I was looking at your mod list, it's very impressive to say the least. What does USD mean in the cost column? I just received my Hooker cat back, after reviewing your mods I feel good about the purchase.

The pic of your T/A in the river is priceless, not many people would do that with a car like yours, very cool.

What mods are you going to do in the future? Is there anything you haven't done in the way of mods?

Ouija

iTrader: (3)

Thanks for the compliment! Yeah I'm crazy when it comes to water and the car. I don't abuse it, but I love the sight of it. You shoudl see the pic of my 95 that I abused, 20' rooster tails coming off the sides...

http://www.zianet.com/ouija/images/95ta/ta1.jpg
http://www.zianet.com/ouija/images/95ta/ta2.jpg
http://www.zianet.com/ouija/images/95ta/ta3.jpg



USD = United States Dollars

My Transmission is being rebuilt right now as a level 3, I'll get it back this week, and reinstall it.

I'm going to be ordering a Beefed up Torque Arm with Relocation and a deep Transmission Pan today so they can go on at the same time.

The next round of mods will finish the suspension - sway bars, controls arms, and skinnies for the front. (Possibly bushings.)

That will get the car almost done. Last major step is Heads and Cam. (I've done H & C install before on a buddy's car.)

I'm sure I'll find some other little things to do. I'm working on finishing up my custom Fuel Rail covers, custom rear Valance, etc.