9" posi problems
#1
9" posi problems
i recently purchased a 98 camaro ss. i love the car and am an avid camaro fan for years. the car is a six speed with a hypertech programmer, slp lid, hurst shifter, mass air mods, and the all favorite 9" moser rear end . the car has 4:11 gears also. for the first 3 days the car would pull posi just fine. now all of a sudden you can not get the car to spin both tires. the car had the rear when i bought it. does any one know what spline axles, and possibly what kind of posi unit the car might have.. with one tire spinning through first and second and just a little in third the car ran 9.07 in the 1/8 so any help would be much appreciated
#2
LS1Tech Sponsor
iTrader: (22)
Join Date: Mar 2005
Location: 32639 Groesbeck HWY. Fraser MI 48026
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
You need to pull the center section and take some pics for us to see what it looks like. It sounds like you either got an Auburn or a Trac-loc posi in there since those two units are the only ones that go bad.
#4
LS1Tech Sponsor
iTrader: (22)
Join Date: Mar 2005
Location: 32639 Groesbeck HWY. Fraser MI 48026
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nittany_marine
Listen to Scott....he knows what he's talking about.
#6
LS1Tech Sponsor
iTrader: (22)
Join Date: Mar 2005
Location: 32639 Groesbeck HWY. Fraser MI 48026
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nittany_marine
Good....I'm trying to figure out a good wheel tire combo to use at the track this season. I hope all is well up north!
Tracks are open but the weather is not good for spray just yet. I have been cutting some metal off of it and I have to do some wiring. Besides that I'm ready to get it scaled and check alignment. I have a track rental an Norwalk on May 8th so I might just take my time and bring it out then.