U-Joint Question- Need Part# Please!!
04-28-2002, 12:53 AM
#2
9 Second Club
iTrader: (5)
Join Date: Jan 2002
Location: Sacramento
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
U-Joint Question- Need Part# Please!! Does anyone have any part#'s for aftermarket replacement u-joints for a stock aluminum Driveshaft with stock 10 bolt rearend. The dealer wants $70 a piece for these things without grease fittings and I'm getting conflicting information from different part stores including Napa.
Thanks in advance.
<small>[ April 27, 2002, 05:01 PM: Message edited by: Reboot ]</small>
Thanks in advance.
<small>[ April 27, 2002, 05:01 PM: Message edited by: Reboot ]</small>
04-28-2002, 10:13 AM
#3
9 Second Club
iTrader: (5)
Join Date: Jan 2002
Location: Sacramento
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Re: U-Joint Question- Need Part# Please!! That's what I was thinking but two different Napa's swear it's a #235 but they have no listings for a 2001 only 1999. The last thing I want to do is take it all apart and find I have the wrong parts.
04-28-2002, 06:06 PM
#4
On The Tree
Thread Starter
Join Date: Nov 2001
Location: upstate NY
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: U-Joint Question- Need Part# Please!! All the NAPA uj numbers that start with a "2"(example-235, 265, 270) are called super strenth joints. the ones that start with a "3"
are regular. If 235 and 355 are the correct numbers, i would go with the 235 super strenth.
are regular. If 235 and 355 are the correct numbers, i would go with the 235 super strenth.
