69z28lt1

in a slight debate, i need proof tho.

BriancWS6

iTrader: (18)

What's the debate specifics? I ran 11.20s in my last car with an untouched 10 bolt. So far 11.8s with this one, should be deep 11's next time out. There have been plenty of people in the 10s with the 10 bolt, especially A4s.

calongo_SS

iTrader: (7)

I've been 11.20's on 10 bolt as well, also cut some 1.6 60' tiems. Didn't last forever though.

SSwanner

iTrader: (128)

best 60' is 1.52 (about a handfull of times), 1/8th went 6.79 once and 6.85-6.86 15x's or so. the only time i ran the 1/4 it went a 10.8 @ 126 (6.99 1/8th and 1.65 60' the track sucked and i spun, should have been a 10.6x on a normal day)

full weight, full boltons, 175-200 shot and MSv3 cam, 140k mile stock longblock, advanced auto parts th350 with b&m shift kit, tight 3500 stall.

its all stock stuff that my dad rebuilt over a year ago with OEM 3.73's

Z28/2002

iTrader: (27)

http://nitrousfedmuscle.com/

Link to GM Muscle's website; he is DEEP in the 10s with the 10 bolt.

Jorday

i went 10.8 @ 127 on 10 bolt that had never had the cover taken off. not even for a fluid change

gillbot

iTrader: (27)

lots of times listed in here: https://ls1tech.com/forums/gears-axles/484653-post-up-if-you-still-running-10-bolt-auto-trans.html

ohsofast

iTrader: (6)

I changed mine out for no reason but when I did have it, I was running 12.0/1.6 60 ft. My rear end never made a funny noise. Only reason I changed b/c my brother got a 12 bolt, can't have your sibling do anything better than you.lol