NastyNate

OK so I broke a lug and from my searches I see it can be done without pulling the axles so I want to change it. Any advice from experience would be greatly appreciated. And what size lugs should I buy? Might as well replace them all with ARP's.

keliente

iTrader: (22)

https://ls1tech.com/forums/showthrea...highlight=stud

yak

iTrader: (15)

pull off the brakes and pound it out. slip the new one in and put a bunch of washers and the lug inpact it done until it's flush on the back. be carefull with the abs ring if your car is four channel.

NastyNate

fixed with no axle removal. I'll post more about it later.