Driveshaft Play (TH400 & Moser 9")
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: NY
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Driveshaft Play (TH400 & Moser 9")
So how much of the shaft should you see going into the transmission? Right now I think I've got about 1/4-1/2". It doesn't channge much even with the rear jacked up vs. dropped (probably due to the torque arm).
Are there signs that the shaft is too long while driving?
Are there signs that the shaft is too long while driving?
#3
10 Second Club
iTrader: (12)
I think he's speaking of the distance between the end of the yoke and back side of tail housing. 1/2" should be fine if I'm reading your question correctly based on you asking if the DS is too long....
If you've only got 1/2" of the slip yoke on the output shaft, you're WAY to short.
*Twilight Zone music playing in the background*
If you've only got 1/2" of the slip yoke on the output shaft, you're WAY to short.
*Twilight Zone music playing in the background*
#6
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: NY
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I think mine may be ok now. It still only shows about a "1/2" when at ride height but I'm going to give it a shot anyway. I should have looked before I pulled it to see if it was different