52172

iTrader: (2)

Was just wondering how this ltd slip is gonna hold up with 90% street use and 10% track with a twin disk clutch and built drivetrain? I only will be running 305-30-18 autocross tires no slicks and probibly no 4500 rpm clutch dumps? I think it should work fine and be reliable for a long time, but want to know how hard people have been on the tru tracs and the results? Thanks

BlackScreaminMachine

iTrader: (17)

had mine blow on a wheel hop incident w/ making 326 rwhp, bolt ons....

52172

iTrader: (2)

anyone else?

52172

iTrader: (2)

this is on a 9" center section I am refering to.

AFASTYZFR1

iTrader: (55)

I have one and will be around 700rwhp....will let you know when I get the tune finished next week

SSmokin 01

iTrader: (14)

750rwhp/635rwtq launching at 62-6400 rpm on a Strange 12-bolt, race weight 3515-3550 lbs, 28" 13.5 Hoosier QTP. Have about 25 passes on it like this and another 30 or so passes between 600-700 rwhp. I always make sure the trans and rear are warm before really hammering it. Take a quick ride out on the main road and launch easy the first pass. 2nd pass I let it have it. So far it's still taking the abuse.

52172

iTrader: (2)

Sweet!!! NIce run for sure. Look like it can handle some abuse. Any others?

99FormulaM6

iTrader: (21)

i make 450/490 on a 100 shot and have a Tru Trac in my 12 bolt and i havent had a single problem

styoung

iTrader: (4)

ive got one in a 9in with 400rwhp and had it at the track once, launchung at 5k, no problems so far.

99WS7

iTrader: (13)

450ish right now on motor and sprayed a 100 shot on it a few times at the track, so far so good.

YellowToy/A

iTrader: (1)

My freind has broke everything else. Tru trac still good. He is 850sh HP and does 6000 grand on slicks. He broke the output shaft, gears and other stuff.

52172

iTrader: (2)

That great to know since my drivetrain is totally built and if there is a weak link it is the tru trac. Thanks for the info guys and anymore out there keep it coming!