Gen 5 Camaro External Bolt-On Tech
Sponsored by:
Sponsored by:

LEDS on 5th Gens

Thread Tools
 
Search this Thread
 
Old 05-13-2012, 06:15 PM
  #1  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default LEDS on 5th Gens

Come in, anyone that has info and or pics, i appreciate it
Old 05-15-2012, 10:36 AM
  #2  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

anyone know how to replace the sidemarker bulbs in the front and back?? is there an access panel?
Old 05-15-2012, 10:46 AM
  #3  
TECH Fanatic
iTrader: (6)
 
Dark SS's Avatar
 
Join Date: Sep 2008
Location: Illinois
Posts: 1,139
Likes: 0
Received 1 Like on 1 Post

Default

It pops out of the fenders. Pry on the back of the lens and it should come out.
Old 05-15-2012, 11:04 AM
  #4  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by Dark SS
It pops out of the fenders. Pry on the back of the lens and it should come out.
yea but how do u get to the back of the lens from inside the fender?
Old 05-15-2012, 01:15 PM
  #5  
TECH Fanatic
iTrader: (6)
 
Dark SS's Avatar
 
Join Date: Sep 2008
Location: Illinois
Posts: 1,139
Likes: 0
Received 1 Like on 1 Post

Default

You don't, you pop out the entire lens assembly and twist out the bulb.
Old 05-16-2012, 04:17 PM
  #6  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

and it doesnt break by doing that?
Old 05-17-2012, 06:01 PM
  #7  
Teching In
 
Mr JB's Avatar
 
Join Date: Oct 2011
Location: Texas
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

There are 3screws inside fender take those out and you can pull back plastic liner to access light there is a tap attached to light u push it out with flat panel popper and light pops out if u try to pry it out from outside you may or may not break it this way it comes out as designed to Disconnect light and replace with new one which snaps back inn takes bout 10mins to complete...
Old 05-17-2012, 09:53 PM
  #8  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by Mr JB
There are 3screws inside fender take those out and you can pull back plastic liner to access light there is a tap attached to light u push it out with flat panel popper and light pops out if u try to pry it out from outside you may or may not break it this way it comes out as designed to Disconnect light and replace with new one which snaps back inn takes bout 10mins to complete...
wut is a flat panel popper?
Old 05-18-2012, 07:55 AM
  #9  
TECH Fanatic
iTrader: (6)
 
Dark SS's Avatar
 
Join Date: Sep 2008
Location: Illinois
Posts: 1,139
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by Midnight00SS
and it doesnt break by doing that?
Nope, I swapped mine out a couple times and never broke one. There is a tap that slides into the fender on one side. If the light doesn't just pop right out, pry on the other end. I used a flat head screw driver with electrical tape wrapped on the tip.
Old 05-27-2012, 09:00 AM
  #10  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

Originally Posted by Dark SS
Nope, I swapped mine out a couple times and never broke one. There is a tap that slides into the fender on one side. If the light doesn't just pop right out, pry on the other end. I used a flat head screw driver with electrical tape wrapped on the tip.
alright im gonna give it a try and see, hope it goes well lol
Old 06-05-2012, 11:59 AM
  #11  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

how the heck do u get to that light in the rear fender lol?
Old 06-07-2012, 04:20 PM
  #12  
TECH Fanatic
Thread Starter
 
Midnight00SS's Avatar
 
Join Date: Jul 2008
Posts: 1,483
Likes: 0
Received 3 Likes on 3 Posts
Default

are u bottom running lights a p13 bulb on the 2012s>??




All times are GMT -5. The time now is 10:06 PM.