2010 Camaro - GT9 cam, D-1SC - What pulley?
07-30-2014, 10:41 AM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Iowa
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
2010 Camaro - GT9 cam, D-1SC - What pulley? Hey guys,
I'm writing this for a friend but basically we are trying to get his 2010 Camaro LS3/6 speed to be much faster at the strip than it is and now that we just changed cams to the GT9 Lingenfelter, springs, rockers, pushrods etc we are trying to figure out what to choose for a pulley for his D1SC, it currently has a 4.38 blower pulley with a 7.65 crank pulley and with the previous cam it made a max of 530rwhp @ 9psi and not sure what will happen with the new cam.
The main question is, what do you guys suggest for a "SAFE" new pulley for 92 octane gas? BTW, how much can you safely put to the LS3 10psi? 12psi?
Thanks!!
I'm writing this for a friend but basically we are trying to get his 2010 Camaro LS3/6 speed to be much faster at the strip than it is and now that we just changed cams to the GT9 Lingenfelter, springs, rockers, pushrods etc we are trying to figure out what to choose for a pulley for his D1SC, it currently has a 4.38 blower pulley with a 7.65 crank pulley and with the previous cam it made a max of 530rwhp @ 9psi and not sure what will happen with the new cam.
The main question is, what do you guys suggest for a "SAFE" new pulley for 92 octane gas? BTW, how much can you safely put to the LS3 10psi? 12psi?
Thanks!!
07-30-2014, 03:43 PM
#2
TECH Regular
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Iowa
Posts: 475
Likes: 0
Received 0 Likes
on
0 Posts
hello? I did a bunch of research on this and it says for every .100" in pulley diameter size is approx 1psi??
At least tell me what some of you guys are running for setups?
At least tell me what some of you guys are running for setups?