Go Back   LS1TECH > Gen 5 Camaro 2010+ Forum > Gen 5 Camaro Tuning, Diagnostics, Dyno results
Sign in using an external account
Register Forgot Password?
Search

Gen 5 Camaro Tuning, Diagnostics, Dyno results Tuning problems, solutions, dyno results for Gen 5 Camaro

Is there a rev limiter parameter for when the brake is depressed (2010 Camaro)?

Reply
 
Thread Tools Search this Thread
Old 05-06-2010, 04:03 PM   #1
Registered User
 
2010 Bumblebee's Avatar
 
Trader Rating: 0
Join Date: Apr 2010
Posts: 21
Default Is there a rev limiter parameter for when the brake is depressed (2010 Camaro)?

Is there a rev limiter parameter for when the brake is depressed (2010 Camaro)?

I know it's a strange question, but if there is/was a rev limiter parameter for when the prake is depressed in the 2010 camaro's computer or any car's computer for that matter it could be set just below the RPMs that the torque converter engauges that way one could hold it to the floor and hold the brake and when the light turns green just take your foot off the brake and whá lá a good launch off the line!

Or is could be used as a brake stand protection measure. That way noboby could beat on the car !

So, Is there a rev limiter parameter for when the brake is depressed (2010 Camaro)? Anyone know, or know a work around ??
2010 Bumblebee is offline   Reply With Quote
Old 05-06-2010, 04:30 PM   #2
TECH Resident
 
someday's Avatar
 
Trader Rating: 0
Join Date: Apr 2003
Location: here, ny
Posts: 860
Default

have u tried it?? what happens when u powerbrake the car? does it not let u??
__________________
'04 Monte Carlo SS/sc... Red/silver exterior, Black interior... drilled/slotted rotors, K&N AirCharger, 3" OR DP, Intense pcm, 180 thermostat...

'04 HD XL1200C... Blue/Orange flames, Bobtail rear fender, Custom front fender, 6 spoke front wheel, Chrome everything... Rinehart 2-1, Mid-Controls, Deuce Wheel w/ 170/60x17, Ness BS, 74hp/85tq... Sold
someday is offline   Reply With Quote
Old 05-06-2010, 06:48 PM   #3
Registered User
 
2010 Bumblebee's Avatar
 
Trader Rating: 0
Join Date: Apr 2010
Posts: 21
Default

Quote:
Originally Posted by someday View Post
have u tried it?? what happens when u powerbrake the car? does it not let u??
No it lets you. I see videos on you2b of people smoking them up a lot. The only way you can do that is by holding the brake aka brake stand. The car will spin the tires plenty if you punch it without help from the brakes but it will take off so I'm not saying the only way the car can light them up is by a brake stand. Personally I don't like brake stands. I like to see a car take off. If it leaves 50 feet of rubber that's great !

I found the rev limiter for each gear including neutral and park. There are also rev limiters by oil & coolant temps. So is there one for depressing the brake that I missed? It's a cool idea isn't it ? Just say you have a 3000 rpm stall converter you could set the rev limiter to 2500 and when the light turn green just release the brake !! 900-1000 RPMs for the stock converter. A good launch every time ! Or like I said it could be used to limit abuse also by not allowing a brake stand.
2010 Bumblebee is offline   Reply With Quote
Old 05-06-2010, 07:35 PM   #4
TECH Addict
 
blk/slvr02ss's Avatar
 
Trader Rating: 21
Join Date: Dec 2006
Location: Port Saint Lucie,Florida
Posts: 2,773
Default

So your saying the A6 has launch control like the M6 ? Torque management is what stop u from beating on the car.
__________________
2008 CBR1000RR !!!
blk/slvr02ss is offline   Reply With Quote
Old 05-06-2010, 08:41 PM   #5
Registered User
 
2010 Bumblebee's Avatar
 
Trader Rating: 0
Join Date: Apr 2010
Posts: 21
Default

Quote:
Originally Posted by blk/slvr02ss View Post
So your saying the A6 has launch control like the M6 ? Torque management is what stop u from beating on the car.
No , I'm not saying that. I have a new, or kind of new idea, I'm talking about. I doubt it is part of the car already.

Just say you have a 3000 rpm stall converter and you could set the rev limiter to 2500 when the brake is depressed if the parameter were in the computer, apply the accelerator & brake, and when the light turns green just release the brake !! 900-1000 RPMs for the stock converter. A good launch every time ! Without heating up the converter too much. Or like I said it could be used to limit abuse also by not allowing a brake stand.
2010 Bumblebee is offline   Reply With Quote
Old 05-06-2010, 08:57 PM   #6
TECH Senior Member
 
Tainted's Avatar
 
Trader Rating: 9
Join Date: Mar 2006
Location: Indianapolis
Posts: 8,440
Default

you want a auto launch control is what yur saying. you can do that with a 2 step rev limiter
__________________
Tainted is offline   Reply With Quote
Old 05-06-2010, 09:51 PM   #7
Registered User
 
2010 Bumblebee's Avatar
 
Trader Rating: 0
Join Date: Apr 2010
Posts: 21
Default

Quote:
Originally Posted by Tainted View Post
you want a auto launch control is what yur saying. you can do that with a 2 step rev limiter
Tell me about this thing
2010 Bumblebee is offline   Reply With Quote
Old 05-07-2010, 09:00 PM   #8
12 Second Club
 
Trader Rating: 0
Join Date: Mar 2006
Location: Clarks Summit, Pa.
Posts: 237
Default

Quote:
Originally Posted by 2010 Bumblebee View Post
Tell me about this thing
http://www.lingenfelter.com/mm5/merc...gory_Code=C163

Will not work well with cats...
__________________
2011 Kona Blue 5.0 Auto--> Tune and DRs only 11.880 @ 118.11, 1.827 Livernois 93 Tune - JPC LTs - CircleD4500 - MT 295 DRs - JLT Catch Can - J&M LCAs - UMI Panhard - BOSS intake-4.10s awaiting install
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
GeorgeInNePa is offline   Reply With Quote
Old 05-07-2010, 10:07 PM   #9
TECH Senior Member
 
Tainted's Avatar
 
Trader Rating: 9
Join Date: Mar 2006
Location: Indianapolis
Posts: 8,440
Default

Quote:
Originally Posted by 2010 Bumblebee View Post
Tell me about this thing

MSD makes a nice unit also. but the lingenfelter in simple plug and play. lots of auto people use them for turbo cars and such as well. great little devices for jsut about anything nitrous included
__________________
Tainted is offline   Reply With Quote
Old 05-07-2010, 10:36 PM   #10
10 Second Club
 
5.3LJimmy's Avatar
 
Trader Rating: 10
Join Date: Jun 2004
Location: Napoleonville, LA
Posts: 2,276
Default

I thought all GM vehicles with drive by wire had this feature. My Envoy and my brothers Colorado will not allow you to hold the brake and apply throttle at the same time. This is a safety feature to prevent them from running off like a camry. If you press on the brake it limits the engine to a preset rpm, but I don't know if it's able to be altered in the tune.
__________________

Fquick
5.3LJimmy is offline   Reply With Quote
Old 05-07-2010, 10:42 PM   #11
12 Second Club
 
Trader Rating: 0
Join Date: Mar 2006
Location: Clarks Summit, Pa.
Posts: 237
Default

Quote:
Originally Posted by 5.3LJimmy View Post
I thought all GM vehicles with drive by wire had this feature. My Envoy and my brothers Colorado will not allow you to hold the brake and apply throttle at the same time. This is a safety feature to prevent them from running off like a camry. If you press on the brake it limits the engine to a preset rpm, but I don't know if it's able to be altered in the tune.
Before I installed the lineloc, I did my burnouts with my foot on the brake and the other on the gas. If I didn't watch the tach, I could run it right into the rev limiter at 6400.
__________________
2011 Kona Blue 5.0 Auto--> Tune and DRs only 11.880 @ 118.11, 1.827 Livernois 93 Tune - JPC LTs - CircleD4500 - MT 295 DRs - JLT Catch Can - J&M LCAs - UMI Panhard - BOSS intake-4.10s awaiting install
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
GeorgeInNePa is offline   Reply With Quote
Old 05-07-2010, 10:42 PM
LS1Tech
Pontiac Firebird




Paid Advertisement
Reply


Tags
2010, 53, brake, camaro, car, club, depressed, engine, injection, limit, limiter, port, rev, revving, sale, tune


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



Join Ls1Tech

All times are GMT -5. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Service - Privacy Statement - Terms of Service - JOBS
Emails & Contact Details