Redsdime

iTrader: (1)

Anyone know the specs? (of course for the 5th gen)

LS1 ZR2

I assume you mean the wheel bolt pattern. It is 5 on 120mm.

blackjack325

iTrader: (1)

same as the vette and 4th gens right?

jamnut

iTrader: (4)

Yes, I'm running 18" C6 wheels on my car for racing.

someday

if its the same as 4th gens, its 5 x 4.75, or 5 x 120.65

Redsdime

iTrader: (1)

i m thinking about putting 2010 camrao rims on a s10. i know the back spacing will be diffrerent. ppl put vette rims on s10s all the time

jay_lt4

iTrader: (4)

you will need some huge wheel spacers!

Sneakyws6

4th gens are 5x4.75 or 5x120.65, the gto, g8 and new camaro are all 5x120.

There have been some instances of studs shearing off due to the slight difference in the pattern. You might also want to make sure the bore opening is large enough as well to clear when you mount the wheel.

Redsdime

iTrader: (1)

now that you mention it im thinking the 5th gen is going to be too small for an s10.

i just think think the rims would look sick on my truck when its done