weiand 142 on ls1??
06-22-2009, 01:51 PM
#6
Launching!
iTrader: (5)
Join Date: Jul 2005
Location: northeast, ms
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
fab up a plate that goes on the bottom side so you can have the blower mounted to the side of the engine. like where the ac is or something. the have fresh air coming in and boosted air coming out. run the piping like a centrivical supercharger. but that would be a lot of fabricating. you would have to make a mounting bracket for the blower. just an idea.
06-22-2009, 05:19 PM
#7
On The Tree
Thread Starter
Join Date: Oct 2008
Location: wausau wi
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks guys im just looking for ideas i do metal fabrication for a living so im not real worried about needing to fab anything. and i will need to research what carb to run any suggestions for that?
Trending Topics
06-23-2009, 11:22 PM
#9
TECH Apprentice
iTrader: (5)
Join Date: Dec 2007
Location: Southern Colorado Front Range
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
fab up a plate that goes on the bottom side so you can have the blower mounted to the side of the engine. like where the ac is or something. the have fresh air coming in and boosted air coming out. run the piping like a centrivical supercharger. but that would be a lot of fabricating. you would have to make a mounting bracket for the blower. just an idea.
