Need help with heads cam stuff
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Location: lehigh valley, pa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Need help with heads cam stuff
I'm running the prc 2.5 5.3l heads and the 228r cam
I know everyone says to measure the pushrods but with the kit I'm getting you order them first and can return and exchange them if need be. But I'd like to order the ones most likey to work. So if someone can give me there best estimate of which ones to order that would be awesome even though I will measure ones everything is going together. Also I don't know which gaskets to get the basic gasket kit on Texas speed has about 10 different sizes any help. For the rod size and gaskets would be greatly appreciated. oh and lastly does anyone thing then under drive pulleys are work the 200 and some bucks
Thanks Matt
I know everyone says to measure the pushrods but with the kit I'm getting you order them first and can return and exchange them if need be. But I'd like to order the ones most likey to work. So if someone can give me there best estimate of which ones to order that would be awesome even though I will measure ones everything is going together. Also I don't know which gaskets to get the basic gasket kit on Texas speed has about 10 different sizes any help. For the rod size and gaskets would be greatly appreciated. oh and lastly does anyone thing then under drive pulleys are work the 200 and some bucks
Thanks Matt