So How torque are these? =)
04-20-2012, 09:59 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Location: Prince George, VA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
So How torque are these? =) I had a 1.3L Rotary In my rx7 Pushing 485 Hp with maybe 200lbs of torque and no rumble just wondering after you did your swap what did it feel like and what did you swap from?????what's the first startup make u feel like?
Last edited by BillyMitheRxguy; 04-20-2012 at 10:10 AM.
04-20-2012, 10:24 AM
#3
Launching!
My friend has an fd with an L92(I think). It's an aluminum 6.0L with the vvt, though the cylinder cut off is disabled. It has the ls3 intake and long tube headers on it too. Compared to a13b, there is no comparison. The torque and power available in any gear (t56- 6 speed from a Camaro) makes the car so easy to drive. 50mph in 6th, hit the gas and go.
As for mileage, not sure, as it's not mine, but around town I would imagine high teens and mid 20s on the hwy should be easy. This is partly based on my car too (see sig).
As for mileage, not sure, as it's not mine, but around town I would imagine high teens and mid 20s on the hwy should be easy. This is partly based on my car too (see sig).
04-20-2012, 01:32 PM
#7
Launching!
Trending Topics
04-21-2012, 08:53 AM
#10
TECH Senior Member
All LS1's make around 345hp/375ft.lbs at the flywheel stock, with LT headers, and exhaust they will make around 400hp/400ftlbs at the fly wheel give or take.
You know how your car feels near redline? Yeah its likely going to feel like that at 2500RPMs all the way to redline with an LS1... I love torque...
