You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
I have the 2002 camaro battery cables for my LS swap. I noticed there are 2 power connections and 2 ground connections on the cables. Other than the starter, where do the other connections go? Is there a specific spot on the block for a ground?
One power to the starter, other to power distribution block, one ground to the block and I only recall seeing 1 ground my my cables. I could be wrong, it's been a while since I've seen them.
Isn't there a ground stud on the passenger fender that this hooks to?
__________________ 2001 Camaro SS SOM M6, AES ls7 442, TFS 235 heads, 102/102 intake, 13/4 to 17/8 kooks stepped headers. MW chassis fab 9" with aluminum center and wave trac diff.
Tuning is underway with the new intake so hoping for a better number.
550 rwhp 512 rwtrq.
11.23@130mph on a 1.70 sixty
4th Gen Camaro Grounds 
