CaptainCrunch42

iTrader: (7)

I posted this in the Gears/Axles forum a few days ago but got zero responses so I figured I would try my luck here!

How hard is it to swap gears in my Strange S60? It currently has 4.10s in it but I am debating going to a higher (numerically lower) gear like 3.54 or 3.73 since I now do a lot more highway and cross country driving than I did when I got the rear. Since I know nothing about working on the drivetrain, what would I be looking at to have a shop do this??

Carl at CRP

iTrader: (9)

The gearset is $295.00, the set up kit which includes new bearings is $195.00 plus shipping for both.

Your local repair shop's labor rate can only be determined by calling or stopping by to see them.

Hope this helps,
Carl

THMotorsports

Average around here is ~$250. All depends on who you have set it up!

Fry_

When looking for a shop to do it you may want to call a few 4x4 shops, they may be more familiar with working on Dana 60 diffs than many performance or repair shops. I'd leave it if I were you, you'll only drop you highway cruising rpm 2-300rpm doesn't seem to be worth the trouble.
Gear ratio calculator.

CaptainCrunch42

iTrader: (7)

I didn't realize it would be that involved - thanks for the help everyone, makes more sense to just leave well enough alone!