98 S10 Twin Turbo build
05-23-2016, 08:22 AM
#1
Teching In
Thread Starter
Join Date: May 2016
Location: Memphis, Tennessee
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
98 S10 Twin Turbo build This is my first LS turbo build. Our family lost everything in fire recently of course we was all safe! So a father of 6 kids (2 in college, 2 in high school, 2 babies). So when I say this is a budget build there's no budget there lol. Not only that I am tool limited ( few sockets and adjustable wrench). Sucks when you had enough tools before 😥😤 anyway here's what I have and doing
98 S10 regular short wheel base (had 6 cyl)
8.8 373 locker disk brakes ( has wires coming out of the top not sure what they are)
Caltracts for stock leaf springs
Competition cam 115 LSA
60lb injectors bosh
2001 6.0 LS (6000 Vortec) drive by wire and full harness and ECU and pedal. Had a broken head bolt but I got it out ( long story how I got out)
Bought another intake with drive by cable, full harness and flashed ECU
317 heads
4l60e with stock converter ( do not want to use)
Pair 275/60/15 Dr
Pair g35 air.70 turbos
Forward mount headers
Motor mounts
Fiberglass cowl induction hood
Looking for
Head studs (not bolts)
Fuel cell tank
Dual valve spring kit
Front and rear drag shocks
Turbo elbows with t4 flange and clamp on forward mount headers
Th700R4 or 4l80e with 3000 stall
Trans lock kit
Have motor in temporary to see where to cut cross member and other clearances. I'll post some pictures when I figure out how I'm new here. I will post this project as I am building.
98 S10 regular short wheel base (had 6 cyl)
8.8 373 locker disk brakes ( has wires coming out of the top not sure what they are)
Caltracts for stock leaf springs
Competition cam 115 LSA
60lb injectors bosh
2001 6.0 LS (6000 Vortec) drive by wire and full harness and ECU and pedal. Had a broken head bolt but I got it out ( long story how I got out)
Bought another intake with drive by cable, full harness and flashed ECU
317 heads
4l60e with stock converter ( do not want to use)
Pair 275/60/15 Dr
Pair g35 air.70 turbos
Forward mount headers
Motor mounts
Fiberglass cowl induction hood
Looking for
Head studs (not bolts)
Fuel cell tank
Dual valve spring kit
Front and rear drag shocks
Turbo elbows with t4 flange and clamp on forward mount headers
Th700R4 or 4l80e with 3000 stall
Trans lock kit
Have motor in temporary to see where to cut cross member and other clearances. I'll post some pictures when I figure out how I'm new here. I will post this project as I am building.
