powersteering cooler install questions
10-10-2007, 02:31 AM
#1
Banned
Thread Starter
iTrader: (8)
Join Date: Jun 2007
Location: san fernando valley, california
Posts: 3,093
Likes: 0
Received 1 Like
on
1 Post
powersteering cooler install questions hi guys i am soon going to buy a power steering cooler from Derale (the rail type) and i am using two install documents http://www.go-fast.org/z28/pscool.html and http://para.noid.org/pscooler/ but the one i am really following is the first one with the red car! but the part that is getting me is that he doesent really specify which hose to get into the cooler and to where the out hose from the cooler should go too 
so i looked at another write up and this is with the NBM 98 and i think he is connecting the hoses differently of some sort. i am pretty confused as of now i am not sure which comes in and where it goes out too so can somebody pleez clear this up for me thanks here is also a pic of the NBM camaro's mounting not sure which write up to follow
so i looked at another write up and this is with the NBM 98 and i think he is connecting the hoses differently of some sort. i am pretty confused as of now i am not sure which comes in and where it goes out too so can somebody pleez clear this up for me thanks here is also a pic of the NBM camaro's mounting not sure which write up to follow 
10-10-2007, 08:28 PM
#3
well one hose should come off the output on the steering gear box, go to the cooler, then the other hole in the cooler should have a hose that goes to the resovoir, then a hose from the resovoir to the gearbox.
