General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

Knock sensor question

Thread Tools
 
Search this Thread
 
Old 03-30-2010, 07:27 PM
  #1  
TECH Veteran
Thread Starter
iTrader: (14)
 
redbird555's Avatar
 
Join Date: Mar 2009
Location: Pompano Beach FL
Posts: 4,444
Likes: 0
Received 8 Likes on 8 Posts

Default Knock sensor question

Hi guys slight issue I've got and I'm a bit confused. I got gas the other day and about 15 min afterwards I got a p0332 code (and a general lack of power I'm guessing from the decreased timing) for a bad rear knock sensor not a big deal I know they go bad, but just to be sure I ran the car till it was empty. Afterwards I put gas in again and cleared the code. Its been over 100 miles now and I havent been babying the car by any means and the light hasnt come back on plus the power feels like its back and I cant hear any pinging. Is there a chance the gas could have been so bad the knock sensor was giving such a low reading the computer thought it was faulty? Or is the sensor shot? If its not throwing a code could it still be broken and pulling timing thats not necessary?
Old 03-30-2010, 07:46 PM
  #2  
TECH Addict
 
fleetmgr's Avatar
 
Join Date: Jun 2009
Location: Tulsa, OK
Posts: 2,012
Likes: 0
Received 0 Likes on 0 Posts
Default

in short, yes, the gas could have been that bad. It might have been contaminated with something. I wouldn't change anything unless it happens again.




All times are GMT -5. The time now is 09:33 PM.