LS1TAUTO

iTrader: (1)

signals dont work??? anybody kno why???? they just stay solid and not blink they work outside the car i can manually turn the signals on by hand???????? any suguestions???

red_diablo

Take the bulb off and put it back on... also try ur hazardss and they should work...

LS1TAUTO

iTrader: (1)

ya hazards still work what bulb???

y2k_ta

iTrader: (80)

Generally the signals on the dash will remain lit if a bulb is burnt out.

LS1TAUTO

iTrader: (1)

ok so i should replace the bulbs and it will be fixed?????????/

red_diablo

Sure replace the two front signal lights

Thizizkai

iTrader: (3)

or flip the bulbs...take it out of the socket turn it and put it back in..

wssix99

iTrader: (5)

Hold it.....

If the hazards light the bulbs correctly but the turn signals remain solid, (on one side or both) then the problem is 100% definitely the turn signal flasher. (The hazards and turn signals use the same bulb filaments but different flasher modules.)

poltergeist 02

iTrader: (65)

^^^^yep this guy has it right!