Shamson5.7

iTrader: (5)

Originally posted this in stereo and electronics. Dont ask why. Its been a long week.
I am looking to find the plate that is riveted onto the window. It has a hole for a nub that slides vertically. The hole the nub fits into is trashed and it allows the pivoting nub to fall out allowing the window to move laterally at will.

Posted a couple pictures. In one picture the nub is in the hole but it doesnt stay in there.

S_carve

iTrader: (1)

Iv got mine apart right now too and its even worse than yours. Most posts iv seen people ended up welding the 2 pieces together. which requires removing the window glass.

Do an advanced search for "window regulator" in title only

poltergeist 02

iTrader: (65)

i'm pretty sure that you can only get the window regulator as an assembly.

LS-1Z28

iTrader: (6)

This is your window regulator channel.... For a 98 TA, the part I found is shown below and the p/n is 16625875.

Shamson5.7

iTrader: (5)

So since this part seems to be discontinued how can I get a replacement aside from a junkyard?

LS-1Z28

iTrader: (6)

junkyard or find a used regulator on here in the parts classified, craigslist...etc

wssix99

iTrader: (5)

Eventually, places like Classic Industries will carry them, but right now they are only making the ones up to '98.

Others here have had success welding the roller back on but I'd recommend doing that with the channel off the glass to avoid heat stress on the glass.

poltergeist 02

iTrader: (65)

for a used one try car-part.com