Wtf?
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: San Diego/Flagstaff
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Wtf?
So I have a hard start problem were it takes a long time to start up and I thought I fixed it when I cleaned the MAF, but that didn't work. So I went to start it today and I noticed that the RPM needle was climbing between cranking, and that it wouldn't start until it got to zero(it starts below zero with key on). What could cause this? And why won't it start until it hits zero?
Btw, fuel pressure is good, pump and filter are new. Same with plugs and wires.
Btw, fuel pressure is good, pump and filter are new. Same with plugs and wires.
#4
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2011
Location: San Diego/Flagstaff
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
It's not dead, i replaced it 4 weeks ago when it really died. All the electricals work(windows, radio, etc), and the starter cranks fine, it just won't start until the rpm gauge hits zero. The problem existed before my battery died too.