LS2 almost stall at start up
#1
LS2 almost stall at start up
I have a drop out LS2 from an 2005 GTO in my RX7 and I can't figure out why it almost stalls when I start it, then seems to recover fine with no input from me. Only code I am throwing is P0315 (crankshaft variation not learned) but from what I have read that shouldn't have any effect on the drivability of the car. after it recovers it seems to run perfectly so I can't figure out why it is behaving this way on startup. engine is bone stock with long tubes and an aluminum LS7 flywheel and clutch.
Attached is a link to a video, (I know its upside down and have no idea why image shack flipped it.)
http://img221.imageshack.us/img221/3...3373008430.mp4
Attached is a link to a video, (I know its upside down and have no idea why image shack flipped it.)
http://img221.imageshack.us/img221/3...3373008430.mp4
#4
Banned
iTrader: (2)
The IAC acts very fast to feed the engine air and take it away when throttle is given.
.
#7
from what I understand the same motor that drives the plate with an input from the DBW pedal is also used to control the plate for idle purposes by taking outputs from various sensors