Rattle Clunking when breaking?
11-03-2012, 10:30 PM
#1
TECH Resident
Thread Starter
iTrader: (10)
Join Date: Sep 2006
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Rattle Clunking when breaking? 2000 TA m6 mostly stock. 156k miles.
So sometimes when breaking I get a loud wobble noise. it doesnt sound like metal on metal, goes in rhythm like a warped rotor would. Seems to be coming from the drivers side rear part of the axle.
That being said, I've read for several hours about similar problems and still nothing. After this has been going on, I've replaced the STOCK rear shocks, I also replaced the pinion seal, and looked over all bushings and whatnot.
there is some play in and out with that side of my axle, now I know some is normal but what would that be if a guy could measure it?
Any Help would Be awesome.!!!
So sometimes when breaking I get a loud wobble noise. it doesnt sound like metal on metal, goes in rhythm like a warped rotor would. Seems to be coming from the drivers side rear part of the axle.
That being said, I've read for several hours about similar problems and still nothing. After this has been going on, I've replaced the STOCK rear shocks, I also replaced the pinion seal, and looked over all bushings and whatnot.
there is some play in and out with that side of my axle, now I know some is normal but what would that be if a guy could measure it?
Any Help would Be awesome.!!!
