Wired cutout and now dash lights wont go on
#1
Wired cutout and now dash lights wont go on
Yesterday I installed an electric cutout and wired it to one of the cigarette lighters and the dash lights didnt turn on last night when I went to start the car up. One of the fuses blew (it was a 5 amp, I forgot exactly where it went to) and I replaced it after I noticed my odometer wasnt lighting up earlier in the day. Could where I wired my cutout be causing the lights not to work?
#3
Thanks for the insight. I wired it to one of the cig. lighters so I wasnt near any of the dash lights. I did some research and found that the dimmer/headlight switch might have gone bad. I ordered one off ebay so im homing that solves it.
Forgot to mention in my previous post that when I cut the power wire for the cig lighter it blew the cig. fuse. Dont know if that makes a difference or not.
Forgot to mention in my previous post that when I cut the power wire for the cig lighter it blew the cig. fuse. Dont know if that makes a difference or not.