The Alchemist

iTrader: (19)

Ok, so over the weekend, I replaced my steering wheel with another factory wheel. Now the horn buttons don't work.

When I lock/unlock the car the horn works, so it's not a horn problem. It has to be the steering wheel buttons.

So my next step is to remove the airbag, and change over the contacts from the original wheel to see if that fixes it.

Are there any diagrams of how the the horn buttons work? I'm not the greatest when it comes to electrical.

ShovelMan

http://www.corvetteforum.com/forums/...stion-wire.jpg

That thing goes in this thing (cam cancel)

http://www.steeringcolumnservices.co...ges/horn02.jpg

and when you press your horn button down, it makes contact thus producing a horn sound.


I'll upload the service manual page in a bit.

Oops, can't upload. Sorry. Try page 2-62 in the 2000 service manual.

The Alchemist

iTrader: (19)

Ok. Let me try to replace the contacts and see if that fixes it.

The Alchemist

iTrader: (19)

I figured it out. It was a combination of issues. When they finished the wheel, they had sprayed it with a clear, and it coated the contacts, and then the spring retainer thing wasn't being held in contact either.

Thanks for the help guys.