General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

truck problem please help quickly

Thread Tools
 
Search this Thread
 
Old 07-05-2006, 11:54 AM
  #1  
Launching!
Thread Starter
 
laxmad16's Avatar
 
Join Date: Apr 2006
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default truck problem please help quickly

i have a 97 ford expedition with about 120,000 miles and today when i went out i found that the back was way down like a lowrider wheels almost rubbing the wheel well, so i took it for a drive thinking that it was just the airsuspension not leveling, after driving i found that only the frint air suspension will work and when in park the frint would raise and when driving the front will lower to even out with the back?? wtf is wrong does it have a rear compressor or what could be the problem?
Old 07-05-2006, 11:56 AM
  #2  
Launching!
Thread Starter
 
laxmad16's Avatar
 
Join Date: Apr 2006
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

i just went out to take a look at it, jacked it up hoping that when i lowered it it would self correct and it didnt, so i looked and i saw a hose that may be the problem, it is not connected to the rear axel it is on the left side and goes into the axel, i could not connect it possibly ripped of i dunno ill take pics so u can c what im talking about
Old 07-05-2006, 01:47 PM
  #3  
Launching!
Thread Starter
 
laxmad16's Avatar
 
Join Date: Apr 2006
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

bad news the hose was ripped out so i plugged it back in and taped it up just to be sure, took it for a ride and...still isnt fixed any ideas this is really getting me ticked off now
Old 07-05-2006, 02:16 PM
  #4  
Staging Lane
 
1badragtop's Avatar
 
Join Date: Feb 2006
Location: Scottsdale, AZ
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default

there is an air line union that connects the air line from the compresor to the air line going to rear air suspension that likes to break. it is located under the brake master cylinder. part is like 1 in long and is hard plastic with a quick coupler at each end. sometimes the lines come completely disconnected. this always makes the rear bags deflate. check that, part is like $30 from a dealer.
Old 07-05-2006, 02:18 PM
  #5  
Launching!
Thread Starter
 
laxmad16's Avatar
 
Join Date: Apr 2006
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks ill go and take a look at that now even though i have almost no clue what half of that stuff is.... (im not the most mechanically inclined)
Old 07-05-2006, 02:25 PM
  #6  
Launching!
Thread Starter
 
laxmad16's Avatar
 
Join Date: Apr 2006
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

any idea where the brake master cylinder is?
Old 07-05-2006, 03:39 PM
  #7  
Staging Lane
 
1badragtop's Avatar
 
Join Date: Feb 2006
Location: Scottsdale, AZ
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default

just have to ask... is the automatic leveling suspension switched on? it would display a yellow "ck suspension" light on dash.
Old 07-05-2006, 06:53 PM
  #8  
On The Tree
 
ksuburban's Avatar
 
Join Date: Jun 2006
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default

I agree with onebadragtop. I work for ford and replace those unions by the truck load.
Old 07-05-2006, 08:32 PM
  #9  
Launching!
Thread Starter
 
laxmad16's Avatar
 
Join Date: Apr 2006
Location: Pennsylvania
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
Default

i found the union and it is together but im not sure, i pushed it together as much as possible, ill take pics in a few mins, i would take it to the dealership but it has been ther 5 times in the last 3 months and i think they may be putting on old parts ect ect just to get me back there....




All times are GMT -5. The time now is 05:17 AM.