618HAWK

iTrader: (361)

What is everyone using to remove your wiper arms?
Is there a special puller made for arms, if so which work the best.

Link-info would be great.

keliente

iTrader: (22)

Loosen nut, but don't take it all the way off.

Take small hammer and tap lightly on the top of the nut while pulling up on the arm.

Ta-da! No pullers, and it's off in 5 seconds.

618HAWK

iTrader: (361)

Been there done that, even with the nut on came close to damaged threads.
Have heard battery post term puller will work, but unconfrimed.

Got to be a correct tool.

LSGunZ28

iTrader: (8)

what the hell is the wiper blade part number? I swear I think Autozone gave me the wrong part... Its extremely difficult to get on.

2001chevroletz28

iTrader: (2)

these wipers are thread locked on and are held on with tension. All you have to do is rock the arm back and forth . Apply pressure on the left side of the nut while pulling up on the right side this is very easy. It may take a few pushes and pulls but it will come lose for you.

Flawless02SS

iTrader: (9)

Not mine, I've tried every trick in the book, and every tool! I guess I will have to remove the hood so I can get a better hold on it.

2001chevroletz28

iTrader: (2)

yes they will I have replaced w/s for almost 15 years now and have never had any I could not get off. Just put a little muscle into it they will come off..