You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
Both of my blinkers quit working. I replaced one of the back passenger side brake bulbs and the right blinker is working again. However, I replaced the front driver side parking orange bulb, the drivers orange front side marker bulb, and the brake bulbs look to be fine. But my left blinker is still staying solid and not flashing????
Update: the big orange corner light (driver side) I replaced today. when I don't have the light switch turned to off, the passenger side corner light is lit up. but even after replacing the bulb on the driver side it still doesn't light up like the other one. But when the lights are turned on, it works! I'm confused?
the thing you plug your light bulb into is burnt, mine did that, and i had to replace the femal plastic thing you plug it into. cheap and easy to splice
I found this to be not so cheap. This same thing happened to the former owner of my car as well. He used a cheap cheap replacement. Its does nothing but burn bulbs (not to mention it does not seal on the turn signal housing like the stock ones) which allows water to leak in .. probably making it situation worse.
I would recommend using at least a quality OEM replacement. I went and got the AC delco replacements.. too bad it was like 50$ each.