Power window issues....AGAIN
02-25-2008, 11:17 AM
#1
Launching!
Thread Starter
iTrader: (14)
Join Date: Mar 2006
Location: Tomball, Texas
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Power window issues....AGAIN Well here is a odd ball problem for me. I replaced the passenger side window motor, no problem...it worked great. Then before I saw auto trix's kit that will increase the power of you window by providing it more electrical current I tried to do it myself. Well it didnt work so I wired it back to how it originally was and passenger side window button work fine. But I now cannot do anything with the passenger side window from the drivers side.....wont go up or down. Any ideas? Damn these windows are pissing me off....
02-25-2008, 11:34 AM
#2
TECH Senior Member
Sure you got the wiring back to original? When my passenger side completely died and replaced the motor the pass switch worked, but not from the drivers side - I replaced the drivers side switch module and worked fine. Gremlins.
02-25-2008, 11:43 AM
#3
The driver side switch may have died, although thatd be a pretty big coincidence to happen at the same time you were screwing with everything. I'd either say that, or that you did something wrong with the wiring. If all else fails you could just buy a new switch....mine was like 10 bucks so its not really a pricey thing.
02-25-2008, 01:17 PM
#6
Launching!
Thread Starter
iTrader: (14)
Join Date: Mar 2006
Location: Tomball, Texas
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
An I do have it back to the factory wiring.....its only two wires. Pretty easy. So hmmmm, just rip both doors off the car and buy new ones?
