General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

What is the problem

Thread Tools
 
Search this Thread
 
Old 06-09-2008, 11:51 PM
  #1  
Launching!
Thread Starter
iTrader: (3)
 
blkgagt94's Avatar
 
Join Date: Mar 2008
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts

Default What is the problem

just finished the engine blew a gasket an crackd both heads bought new heads an everythnig else. all new rad. an hoses an water pump ran fine for a day an a half then i was driving then it was idleing all messd up an shaking. found the problem 2 spark plug wires meltd from resting on header fixed that ran fine for the 3 times i drove it up the street an turn around then i left for 5mins an all the shudden ran like **** again like it did b4 went back to the garage an stil runs all messd up. its running rich on gas any1 no what the problem is?
Old 06-10-2008, 12:40 AM
  #2  
Launching!
Thread Starter
iTrader: (3)
 
blkgagt94's Avatar
 
Join Date: Mar 2008
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts

Default

its 3800 engine
Old 06-11-2008, 05:00 AM
  #3  
Launching!
iTrader: (1)
 
Craiggg's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
Default

Check the vacuum lines on the map sensor. Mine ran so shitty and it was that and the spark plugs and wires.
Old 06-11-2008, 12:50 PM
  #4  
Launching!
Thread Starter
iTrader: (3)
 
blkgagt94's Avatar
 
Join Date: Mar 2008
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts

Default

did wires an spark plugs think my cuzion lookd at the vacuum lines we saw that the one cycender running rich the back passengerside one injecter?




All times are GMT -5. The time now is 06:08 PM.