gfeller2006

I just installed a lid and cut out behind the stock cat converter... Now my SES light is on... What could this be.. Im guessing one of the sensors up on the air box is acting up. Maybe just reset the light and make sure the plugs on the sensors are seated properly?

Bad Blue WS6

iTrader: (41)

what code is it? (advance auto will run it for free)

gfeller2006

Havent checked yet... autozone does it here I will go check after work...

LANDONZ

iTrader: (23)

make sure you hooked your air/temp sensor back up

Undertow74

iTrader: (45)

Exactly as stated above.....check your air/temp sensor on the lid. If not that, mabe something with a 02 sensor seeing as you installed a cutout.....those are both possible.

BadA$$

iTrader: (4)

Was messing wiht stuff last with weak and left the sensor on the lid undone and threw a code, plugged it back up and BAM!!! FIXED.

chaman

iTrader: (5)

I liked the BAM! effect there.....pretty dramatic! LOL!! Glad you sorted out.

snake charmer

iTrader: (118)

good deal . when i take my stuff off i always double check .