General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

Temp.?!

Thread Tools
 
Search this Thread
 
Old 09-19-2008, 05:34 AM
  #1  
Registered User
Thread Starter
 
NewToZ28's Avatar
 
Join Date: Aug 2008
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default Temp.?!

I have a 1995 Z28 and when the car is off the motor temp gauge goes to pretty dam high up there. but then when you start the car it goes to where it should be. Is this a problem or is this just somthing that they do?!
Old 09-19-2008, 03:07 PM
  #2  
TECH Apprentice
iTrader: (2)
 
question's Avatar
 
Join Date: Feb 2007
Location: Boomtown
Posts: 370
Likes: 0
Received 0 Likes on 0 Posts
Default

The gauge goes up BEFORE you have started the car? As in - you wake up in the morning, go out and put your key to ON and gauge jumps to red? Or you run the car, gauge is at 210ish, turn it off and it shoots to red? Please be a bit more specific if ya could.
Old 09-19-2008, 10:04 PM
  #3  
TECH Resident
iTrader: (1)
 
Formula413's Avatar
 
Join Date: Dec 2006
Location: Western Mass
Posts: 911
Likes: 0
Received 1 Like on 1 Post

Default

I have noticed that, if the car is already warmed up, when I turn the key to on (engine off) the temp gauge will rise, and then after I start the car it slowly falls back to normal.
Old 09-20-2008, 05:30 AM
  #4  
Registered User
Thread Starter
 
NewToZ28's Avatar
 
Join Date: Aug 2008
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

after it warms up. sorry. after i have driven it and it has completly warmed up it goes to almost red when its off but when i start it it goes back to where it should be.
Old 09-20-2008, 05:41 AM
  #5  
11 Second Club
iTrader: (13)
 
jsteele90's Avatar
 
Join Date: Mar 2007
Location: delaware
Posts: 2,871
Likes: 0
Received 1 Like on 1 Post

Default

i wouldnt worry about it.get a real gauge and see what it reads
Old 09-20-2008, 09:35 AM
  #6  
TECH Addict
iTrader: (1)
 
samson_420's Avatar
 
Join Date: Nov 2007
Location: Narnia
Posts: 2,372
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jsteele90
i wouldnt worry about it.get a real gauge and see what it reads
Or at least check it with a infrared thermometer. The stock gauge is not all that accurate.
Old 09-20-2008, 09:42 AM
  #7  
TECH Resident
iTrader: (3)
 
1996firebirdformula's Avatar
 
Join Date: Oct 2007
Location: Seymour, Indiana
Posts: 883
Likes: 0
Received 0 Likes on 0 Posts

Default

Mine does same thing i think it gets heat soaked. Mine has like heat shield attached to the hood so that don't help it. I replaced my Thermastat last year.




All times are GMT -5. The time now is 06:16 AM.