Testing Coils?
#1
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
Testing Coils?
Is there a way to test the LS1 coil to determine if it is good/bad?
Buddy's car is LT1 with the LTCC conversion and it pulls strong to 6300 then looses power by about 50HP then rises and falls. Trying to rule out coils as being the problem.
Buddy's car is LT1 with the LTCC conversion and it pulls strong to 6300 then looses power by about 50HP then rises and falls. Trying to rule out coils as being the problem.
#3
TECH Fanatic
Thread Starter
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
Re: Testing Coils?
Thanks. Looking back on the install we did not place the coils in the best location. We put them on the firewall b/c it looks cool....next time we will think of function....
#4
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
Re: Testing Coils?
The only test I know of requires an osilliscope.
The 2ndary output & primary current ramping tests.
Have seen a poor PCM driver this way B-4.
What is the limiter in this car set at??
The 2ndary output & primary current ramping tests.
Have seen a poor PCM driver this way B-4.
What is the limiter in this car set at??