Need Advice!
#1
Teching In
Thread Starter
Join Date: Feb 2008
Location: Saint Charles, MO
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Need Advice!
I am going to most likely purchase another Trans Am WS.6. My last one was a 30,000 mile 2000 Trans Am WS.6 M6 Bone Stock...all I did was install a SLP Intake, Smooth Bellow, and a cut-out. It ran great, but due to my job sucking I had to sell it. I just now sold the car I never use....(my old Mustang) and want to get a 35,000 mile 2001 WS.6 M6 with a 12 bolt, built 6-speed, slp intake, and Full Exhaust! I should be pleased! My question is this strange 12 bolt on the car has 4.30 gears in it! Now I drove this car and it pulls hard! Really Fun to drive but it almost seems that I am in and out of the gears to quickly!
Question 1. Is 4.30's too much!!!??? Is any body else running 4.30's????
Question 2. In the future what type of cam should I go with since the gears are so steep! I am a fan of the 224/224 duration cams but gears like this might compliment a larger duration cam!
Thanks in Advance
-Rob-
Question 1. Is 4.30's too much!!!??? Is any body else running 4.30's????
Question 2. In the future what type of cam should I go with since the gears are so steep! I am a fan of the 224/224 duration cams but gears like this might compliment a larger duration cam!
Thanks in Advance
-Rob-
#3
TECH Regular
Join Date: May 2008
Location: Marissa, Il
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Damn Rob, You had to go and get rid of those two sweet *** cars. I thought you were nuts when I seen you getting rid of them. At least you are getting another Fbody