cacmanjr

iTrader: (14)

Are the MAF tables the same between the 2006 Z06 5-wire MAF and the 85mm 5-wire truck MAF?

sroach20

iTrader: (31)

https://ls1tech.com/forums/showthrea...light=85mm+maf

cacmanjr

iTrader: (14)

Thanks for the link, but I did not see anything for the 2006 z06 MAF. It is not 85mm and is inside of the air filter assembly.

sroach20

iTrader: (31)

this gives you the readings for the truck maf. now you just need to find the 06 values.

cacmanjr

iTrader: (14)

Thanks! Anybody got the figures for the 2005, 6, or 7 MAF?

Viper

iTrader: (6)

HPTuners does in the stock repository tune section.

cacmanjr

iTrader: (14)

Thanks for the info, Viper. I will check their web site to see if they are there.

Viper

iTrader: (6)

You need a login to look.

Here is a 2007 maf. Low table and high table. Not sure why it's split in 2.

Low, starts at 1000 to 5800, 150 increments

0.75781 0.96875 1.19531 1.47656 1.81250 2.20313 2.66406 3.19531 3.78906 4.44531 5.17188 5.97656 6.86719 7.87500 8.96875 10.14844 11.40625 12.78906 14.30469 15.96094 17.77344 19.73438 21.83594 24.07813 26.46094 28.99219 31.66406 34.48438 37.48438 40.70313 44.22656 47.98438 51.98438

High starts at 5800 goes to 12200 same increments

51.98438 57.70313 63.84375 70.42188 77.41406 84.78906 92.59375 100.84375 109.63281 118.91406 128.68750 138.96094 149.70313 160.97656 172.79688 185.19531 198.25781 211.97656 226.35938 241.43750 257.19531 273.63281 290.82813 308.81250 327.62500 347.33594 367.96875 389.60938 412.32031 436.15625 461.21094 487.54688 511.99219

cacmanjr

iTrader: (14)

Thqnks again, Viper. Definately some differences. Talked to a tuner today that will do custom tables for my engine combination on the dyno. Sounds like the only thing to do.

Viper

iTrader: (6)

Good luck Carl. The tables are really just a starting point; the tuner will adjust accordingly.

cacmanjr

iTrader: (14)

Thanks! I will probably need it.