408 hci opinions
01-18-2009, 12:32 PM
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Oct 2007
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
408 hci options i know this has been discussed alot, but ive yet to really get any decent info on the subject..
somewhat daily driven street car.
408 with vengeance ported 92/95mm TB massively worked 5.3s and tiny tsp 231/237 cam.
Im heavily considering pulling the hci and selling it in favor of a good l92/custom cam setup, since i imagine id only be out a few hundred after all is said and done for better (?) parts. with that being said, would i want a l76 or a single plane? if single plane, carb-style TB or elbow and use my 95mm REVx TB? 100% street driven car too.
I know id make more power and most likely be alot happier with TFS heads, but right now its just not in the picture (since ill need a rear end soon)
somewhat daily driven street car.
408 with vengeance ported 92/95mm TB massively worked 5.3s and tiny tsp 231/237 cam.
Im heavily considering pulling the hci and selling it in favor of a good l92/custom cam setup, since i imagine id only be out a few hundred after all is said and done for better (?) parts. with that being said, would i want a l76 or a single plane? if single plane, carb-style TB or elbow and use my 95mm REVx TB? 100% street driven car too.
I know id make more power and most likely be alot happier with TFS heads, but right now its just not in the picture (since ill need a rear end soon)
Last edited by CBIII; 01-18-2009 at 12:50 PM.
